OM 17
Field 10 A micro-ohmmeter for inductive and non-inductive resistance
Succeeding OM 16, OM 17 offers upgraded performances, in particular for inductive resistance measurements: Granted with a greater autonomy, OM 17 allows longer test campaigns to be performed at 10 A with continuous current (up to 60 min) and offers faster current loading of coil resistances (stabilization time < 2 s).
Easy to use, it carries out 4-wire measurements of inductive and non-inductive resistance with a continuous or pulse current up to 10 A. Offering a high precision of 0.05% and a 0.1 µΩ resolution, it has a different ranges selectable from 5 mΩ to 2.5 kΩ.
Instrument:
OM17 On-site micro-ohmmeter
Supplied in standard with:
– Standard mains supply cable to recharge the battery
– Quick start manual
Clips and probes:
Please note that 2 clips are needed per instrument.
AMT005 Long handspike, per unit
Needle diameter: 3 mm, length without handle: 83 mm, total length: 215 mm, cable length: 5 m
AMT006 Large kelvin clip, per unit
Opening diameter: 25 mm, cable length: 5 m
AMT011 Small handspike, per unit
Needle diameter: 3 mm, total length: 125 mm, cable length: 5 m
AMT012 Small kelvin clip, per unit
Opening diameter: 12 mm, cable length: 5 m
AMT013 Triggered handspike, per unit
Needle diameter: 3 mm, length without handle 83 mm, total length: 215 mm, cable length: 5 m
Triggering cable to be connected by RS 232
AMT008 Extension lead, length: 20 m
AMT014 External Pt100 temperature sensor
AMT015 Extension cable for AMT014, length: 2 m
Other accessories:
LOG OM Configuration & exploitation software for OM 17 – Includes a F / F RS 232 cable
AN5909 RS232 F / F cable (PC connection)
AN5875 RS232 F / M cable (Printer connection)
Certification:
QMA11EN COFRAC certificate of calibration
Packing information:
Size 270 x 250 x 180 mm
Weight 4 kg
